Navigation Menu+

My Little Pony Mane Hoodie Tutorial by Kelly of Analog Bytes

Posted on Jul 15, 2015 by in My Little Pony, Season 3 | 0 comments

My Little Pony Hoodie Tutorial for Crafting Con

Hello everyone! I’m Kelly from Analog Bytes and I’m excited to share a tutorial for adding a mane and ears to a hoodie or hat. For this tutorial I’m going to use the Happy Homemade Sew Chic Kids Hoodie, but this tutorial should be generic enough to use for just about any hat or hoodie. My initial thought was to use the hat in the Oliver + S Little Things to Sew book, but my design direction (aka preschooler decided she would prefer a hoodie at the last minute).

Supplies

hoodie supplies

First thing you’ll need is to gather your supplies:

  • Your pattern of choice and all of it’s required supplies
  • Yarn the color (or colors you want to use for your mane). When choosing a yarn keep in mind the texture and density, the yarn we ended up choosing for this tutorial is a thin, dense yarn that required more to achieve the fullness of the mane and ended up being rather on the heavy side. In the past we’ve used lighter, fuller yarn that has provided better results in my opinion.
  • Index card or other thin item approximate 3-3.5 inches.
  • Scissors.
  • Ear Template. You can find a template to use as an ear pattern or you can create you own. Searching for <animal type> ear pattern will usually get you what you need. For this tutorial, I used this critter ear template and have self drafted ears in the past.

Steps

  1. Make the hair for your mane.

    Take you index card and start wrapping the yarn around it to create a group of “hair.” Use another piece of yarn to tie the loops together; this is similar to making a pompom, just less full. Depending on the fullness of the yarn you are using, the number of wraps per group will vary — the rainbow yarn was 20 wraps per group, while a fuller yarn used around 15.

    Continue this process until you have enough hair for your mane.

    pile of yarn groups to make mane

  2. Cut out pattern pieces and mark mane location

    After you’ve cut our your pattern pieces, make any necessary marks for designating the position of your mane. I wanted my maine to be around 2.5 inches wide, so while my pattern pieces were still flat, I marked 1.75″ inches in from each side (1.25″ on each half of the hood and .5″ for the seam allowance). Wanting to keep the hair out of the seam allowance I also marked off those areas.

    marking mane location on the hoodie

  3. Assemble outside of hood

    I’ve opted to line my hood; I want to add the mane at this point before continuing with assembly. If you are not lining your hood or hat you can continue with assembly and add the mane afterwards.

  4. Add mane

    Next, you want to add your hair groupings to your hood. Depending on the fabric you are using there is a couple of ways to do this. For the knit hooding I’m making, I found it easier to sew the groupings to the hood. For fleece, I’ve pushed the yarn ends through the fleece and tied the yarn on the inside.

    sewing the yarn in place

    As you’re attaching the yarn, you’ll want to stagger your groupings. Your spacing will vary depending on the type of yarn you’re using and the size of your bundles.

    staggering mane hair placement

    Find a model and try on your headpiece to see if you are happy with coverage and placement; tweak as necessary.

    testing mane

  5. Ears

    Cut and assemble your ears and then find a model to determine ear placement. *If you are lining your hood or have not completed hood assembly, remember the front seam allowance is still visible so keep that in mind or tuck it under to avoid placing ears too far forward.

    After you determine ear placement, attach ears to hood.

  6. Continue with Garment Assembly

    Now is the time to add the lining to your hood and finish the remainder of your garment.

    ** Make sure to check seams are clear of mane and ears before sewing.

  7. Styling Your Mane

    Now that the garment is finished, it’s time to style your mane. Trim up any straggly pieces of yarn. You can leave the yarn looped for a more curly mane or you may cut apart the loops for a straighter mane.

    curly and straight mane examples

Now you should have a finished garment complete with mane and ears. My design director has determined we are not done with this project and has requested the addition of wings and a tail.

finished hoodie

Details

Patterns
  • Pattern S in Happy Homemade Sew Chic Kids. I picked this pattern because I made it during a sew along and knew it would look good in knit.
  • Pony ear pattern
Fabrics
  • Blue Knit from Chez Ami
  • My Little Pony Comic Cotton from JoAnns (used for hood lining)
Notions
  • Rainbow yarn from JoAnns. After we had picked out the appropriate red, orange, yellow, green, blue, and purple yarns, my design director spotted this rainbow yarn and decided it would work for Rainbow Dash.
Notes
The biggest disappointment was the selected yarn and the amount needed to create a full mane. We’ve had better success with other yarns.
another finished mane

 

0 Comments

Trackbacks/Pingbacks

  1. Hoodie Tutorial for Crafting Con – My Little Pony | Analog Bytes - […] a first for me, I’ve got a guest post/tutorial on the Crafting Con website. It’s for a My Little…

Submit a Comment

Your email address will not be published. Required fields are marked *